Main Page Technical Spec Stern Cabin Wheelhouse Engine Room Galley Saloon Exterior


Viator - Technical Specifications

Full Specification
Type of vessel Replica Dutch Barge
Year of Construction 2008
Builder Hull by MG Fabrications. Original fit out by Union Wharf Construction Ltd (since much modified)
UK Registration No SSR159776
BW Index No 519150
Hull Identification No GBUWCOO2 E506
Boat Safety Certicate Issued February 2022 - Expires March 2026
OFCOM Radio Callsign 2IHW8
MMSI No 235109899
Atis No 92235109899
Dimensions 16.76m x 3.5m
Draft Less than 1.0m at stern. Airdraft is 2.55m or 1.85m with wheelhouse down (so will go through nearly all UK & European broad beam canals)
Mass in Tonnes Between 23 and 28 tonnes (depending on which crane driver you believe - certainly less than 30)
Engine Beta BV3800 90hp Serial No 4J2583WOCK15354
Drive Hercules Hydraulic Drive and hydraulic bowthruster. All valve gear and pipes renewed 2018
Diesel Tank Approx 450 litres for engine, 375 litres for heating (2 separate tanks)
LPG 2 x 13kg Propane cylinders supplying gas hob and oven
Fresh Water Tanks Approx 500 litres in two balanced flexible tanks designed to fit to space in bow.
Waste Water Tank 400 litres – pump out or Jabsco electric discharge where allowed
Headroom Lounge: 1.95m Galley: 1.97m Wheelhouse: 1.97m Bedroom: 1.87m
Wheelhouse Brand new in 2016. Fully demountable and double glazed. Vetus Hydraulic steering

Phone: 0044 7983 563690
Email: viator@calara.co.uk